Go to content

Undergraduate Catalog 2016-2017

Aerospace Engineering (ENAE)

A. James Clark School of Engineering
3179 Glenn L. Martin Hall, 301-405-2376
Chair: N. Wereley (Minta Martin Professor of Aerospace Engineering)
Director: J. Barlow (Director of Glenn L. Martin Wind Tunnel), R. Sanner (Assoc Prof & Director of Undergraduate Studies), R. Sedwick (Assoc Prof & Director of Honors Program)
Professors: J. Baeder, O. Bauchau, R. Celi, I. Chopra (Alfred Gessow Professor of Rotorcraft Engineering), A. Flatau, W. Fourney (Professor, Associate Dean of Engineering), J. Hubbard (Samuel P. Langley Distinguished Professor), S. Lee, M. Lewis, E. Oran (Glenn L. Martin Institute Professor), D. Pines (Dean, Clark School of Engineering))
Associate Professors: D. Akin, C. Cadou, A. Datta (Assoc Res Sci, Visit Assoc Prof), P. Martin, D. Paley (Willis H. Young Jr. Professor of Aerospace Engineering Education), R. Sanner, R. Sedwick, A. Winkelmann, K. Yu
Assistant Professors: C. Hartzell, A. Jones, S. Laurence, H. Xu
Lecturers: B. Barbee, A. Becnel (Lecturer), C. Carignan, Y. Choi (Assoc Res Sci), L. Healy, D. Israel, K. Lewy, J. Mitchell, E. Morelli, V. Nagaraj (Sr Res Sci), D. Palumbo
Affiliate Professors: A. Trouve
Affiliate Associate Professors: M. Gollner, J. Humbert, A. Marshall
Professors Emeriti: J. Anderson, E. Jones, J. Leishman (Prof Emeritus)
Visiting Faculty: M. Bowden, F. Schmitz

The Major

Aerospace engineering concerns processes involved in design, manufacture and operation of aerospace vehicles within and beyond planetary atmospheres. Vehicles range from helicopters and other vertical takeoff aircraft at the low-speed end of the flight spectrum, to spacecraft traveling thousands of miles per hour during launch, orbit, trans-planetary flight or re-entry at the high-speed end. Between are general aviation and commercial transport aircraft flying at speeds well below and close to the speed of sound, and supersonic transports, fighters and missiles. Although each speed regime and each vehicle poses its special problems, all aerospace vehicles can be addressed by a common set of technical specialties or disciplines.

Sub-disciplines of Aerospace Engineering are: aerodynamics, flight dynamics, propulsion, structures, and "design". Aerodynamics addresses the flow of air and associated forces, moments, pressures, and temperature changes. Flight-dynamics addresses the motion of vehicles including trajectories, rotational dynamics, sensors, and control laws required for successful accomplishment of missions. Propulsion addresses the engines which have been devised to convert chemical (and occasionally other forms) energy into useful work to produce the thrust needed to propel aerospace vehicles. Structures addresses material properties, stresses, strains, deflection, and vibration along with manufacturing processes required to produce very light weight and rugged elements needed in aerospace vehicles. Aerospace "design" addresses the process of synthesizing vehicles and systems to meet defined missions and more general needs. This process draws on information from other sub-disciplines while embodying its own unique elements. The Aerospace Engineering program is designed to provide a firm foundation in various sub-disciplines.

Courses offered by this department may be found under the acronym: ENAE

The Bachelor of Science in Aerospace Engineering is accredited by the Engineering Accreditation Commission of ABET, www.abet.org , 111 Market Place, Suite 1050, Baltimore, MD 21202-4012, telephone: (410) 347-7700.

Program Objectives

(1) Our graduates will be successful in their professional careers, including industry, government service, and academia, in the State of Maryland and beyond.

(2) Our graduates will contribute to the creation of useful new products, or the generation of original research, by analyzing and implementing solutions to relevant problems in the component disciplines of Aerospace Engineering.

(3) Our graduates will contribute effectively when part of an integrated team, clearly communicating with team members, supervisors, and clients.

(4) Our graduates will understand the societal context in which their profession is practiced, and will successfully adapt to future developments in both technology and the employment market.

Program Learning Outcomes

As a result of completing our undergraduate program, our students should have developed the following skills:

1) Ability to apply knowledge of mathematics
2) Ability to apply knowledge of basic science (chemistry, physics)
3) Ability to apply knowledge of engineering principles
4) Ability to use computers to solve engineering problems
5) Ability to identify, formulate, and solve engineering problems
6) Ability to design and conduct experiments
7) Ability to analyze and interpret data
8) Ability to design a component, system, or process to meet desired needs under realistic constraints
9) Ability to use the techniques, skills, and tools of modern engineering practice
10) Ability to write effectively
11) Ability to speak effectively
12) Ability to function effectively as part of a multidisciplinary team
13) Understanding of professional and ethical responsibility
14) Knowledge of contemporary issues in engineering
15) Understanding of the impact of engineering solutions in a global and societal context
16) Awareness of the need to continually upgrade my technical knowledge base and skills

Academic Programs and Departmental Facilities

The Aerospace Engineering Department has a number of facilities to support education and research across a range of special areas. The department has subsonic wind tunnels with test sections ranging from a few inches up to 7.75 feet by 11.00 feet as well as a supersonic tunnel with a 6 inch by 6 inch test section. There are a number of structural test machines with capabilities up to 220,000 pounds for static loads and 50,000 pounds for dynamic loads. The department also has experimental facilities to test helicopter rotors in hover, in forward flight, and in vacuum to isolate inertial loads from aerodynamic loads. There is an anechoic chamber for the investigation of noise generated by helicopters, and an autoclave and other facilities for manufacturing and inspecting composite structures. The neutral buoyancy facility, which investigates the assembly of space structures in a simulated zero gravity environment, is supported by robots and associated controllers. There are also many computers and workstations that provide local computing capability and extensive network access to campus mainframes, supercomputing centers, and all the resources of the Internet.

Admission to the Major

Admission requirements are the same as those of other Engineering Departments. For admission information please see A. James Clark School of Engineering under The Colleges and School section of this site.

Requirements for the Major

    Credits Credits
   First Second
 Freshman Year Sem Sem
ENES100Introduction to Engineering Design (**can be taken first or second semester) 3**  
ENAE100The Aerospace Engineering Profession 1  
CHEM135General Chemistry for Engineers 3  
MATH140/141Calculus I, II 4 4
PHYS161General Physics I   3
ENES102Mechanics I (**can be taken first or second semester)   3**
ENAE202Aerospace Computing   3
 General Education Program Requirements 3 3
 Total Credits 14 16
   Credits Credits
   First Second
 Sophomore Year Sem Sem
ENES220 Mechanics II 3  
ENAE283Introduction to Aerospace Systems 3  
MATH241Calculus III 4  
ENAE200The Aerospace Engineering Profession II   1
ENES232Thermodynamics   3
MATH246Differential Equations   3
MATH461Linear Algebra for Scientists and Engineers or   3-4
  MATH 240Introduction to Linear Algebra    
PHYS260/261General Physics II 4  
PHYS270/271General Physics III   4
 General Education Program Requirements 3 3
 Total Credits 17 17-18
   Credits Credits
   First Second
 Junior Year Sem Sem
ENAE311Aerodynamics I 3  
ENAE301Dynamics of Aerospace Systems 3  
ENAE362Aerospace Instrumentation and Experimentation 3  
ENAE324Aerospace Structures   4
ENAE432Control of Aerospace Systems   3
ENAE380Flight Software Systems 3  
ENGL393Technical Writing   3
 General Education Program Requirements 3 3
 Aeronautical Track:    
ENAE414Aerodynamics II   3
 Space System Track:    
ENAE404Space Flight Dynamics   3
 Total Credits 15 16
   Credits Credits
   First Second
 Senior Year Sem Sem
ENAE464Aerospace Engineering Lab   3
ENAE423Vibration & Aeroelasticity 3  
ENAE398*Honors Research Project, or   3
  ENAE 400s*one 400 level ENAE course    
ELECTIVE+ Technical Elective; see note below   3
 General Education Program Requirements 3 3
 Aeronautical Track:    
ENAE403Aircraft Flight Dynamics 3  
ENAE455Aircraft Propulsion & Power 3  
ENAE481Principles of Aircraft Design 3  
ENAE482Aeronautical Systems Designs   3
 Space System Track:    
ENAE441Space Navigation & Guidance 3  
ENAE457Space Propulsion & Power 3  
ENAE483Principles of Space Systems Design 3  
ENAE484Space Systems Design   3
 Total Credits 15 15
* Only one of ENAE 398, 488 or 499 may be used for these electives.
+One 300/400 level course in Engineering, Mathematics, or Physical Sciences that has been approved for this purpose by the Undergraduate Program Director.

Minimum Degree Requirements: The fulfillment of all department, school, and university requirements.  A minimum of 124 credits are required for an Aerospace Engineering degree.

Students must select a track. All courses in either the Aeronautical or Astronautical track must be completed. Students in either track who wish to gain a broader education across the aeronautical or space application areas can take courses required in the other track as electives.

Academic Benchmarks: Students pursuing the major should review the academic benchmarks established for this program. See: www.4yearplans.umd.edu . Students will be periodically reviewed to insure they are meeting benchmarks and progressing to the degree. Students who fall behind program benchmarks are subject to special advising requirements and other interventions.

Aerospace Electives

The department offers a range of electives. The following courses have recently been offered as electives for the undergraduate degree:

ENAE398H Honors Research  
ENAE415 Helicopter Theory 3
ENAE416 Viscous Flow & Aerodynamic Heating 3
ENAE424 Design &Manufacture of Composite Prototypes  
ENAE425 Mechanics of Composite Structures 3
ENAE426 Computer-Aided Structural Analysis and Design 3
ENAE471 Aircraft Flight Testing 3
ENAE488B Intro to Computational Structural Dynamics 3
ENAE488M High Speed Aerodynamics 3
ENAE488P Product Design 3
ENAE488R Hybrid Rocket Design 3
ENAE488W Design of Remotely Piloted Vehicles 3
ENAE499 Elective Research (Repeatable to 6 credits) 3


Other Requirements for the Major

See Chapter 6 for minimum grade requirements in key prerequisite courses for engineering students. Students should follow the sequence of courses as outlined in the aerospace engineering degree requirements and four-year plan.


Advising is mandatory each semester.  First year students are primarily advised by the Assistant Director of Undergraduate Studies.  After the first year, students are assigned to a faculty advisor whose permission is required for course registration each semester. The list of advisor assignments is available on the department's website.

Undergraduate Research Experiences

Students can be employed and perform research in any of the department's research labs, centers, or facilities. Participation in an on or off campus internship, co-op, or other experiential learning opportunity is strongly encouraged. See the aerospace engineering undergraduate studies staff for information on performing research in a department lab and contact the Engineering Co-op and Career Services office for assistance in obtaining off campus positions or experiences.

Honors Program

The Aerospace Engineering Honors Program at the University of Maryland provides a rigorous and comprehensive education for a career in technical leadership and scientific or engineering research. Honors coursework encompasses the required curriculum for all University of Maryland Aerospace Engineering students at an advanced level.

At the end of their first academic year, each aerospace student is evaluated and students are invited to join the program based on their University of Maryland cumulative grade point average and progress toward their degree in Aerospace Engineering. Honors sections of ENAE283, ENAE311, and ENAE423 (designated by an 'H' following the course number) are offered as part of this program, in addition to an honors research project, ENAE398H, which culminates in a scholarly paper and presentation at a professional conference. Students who complete the honors curriculum graduate with Aerospace Honors at the time of commencement.

Student Societies and Professional Organizations

The Department is home to student chapters of the American Institute of Aeronautics and Astronautics, American Helicopter Society - International, and the Sigma Gamma Tau aerospace engineering honors society. Aerospace Engineering students are also frequent participants in student activities of the Society for Advancement of Materials and Process Engineering.

Scholarships and Financial Assistance

The Department offers academic scholarships, and recipients are chosen based on merit. All admitted and current students in the department are automatically considered for these awards. No separate application is required. The Office of Student Financial Aid (OSFA) administers all types of federal, state and institutional financial assistance programs and, in cooperation with other university offices, participates in the awarding of scholarships to deserving students. For information, visit: www.financialaid.umd.edu .

Awards and Recognition

The Department offers the following awards: Gessow Academic Achievement Awards for the seniors with the highest overall academic average at graduation; R.M. Rivello Scholarship Award and the Joseph Guthrie Memorial Award for highest overall academic average through the junior year; Chair Award for leadership and service to the department, Sigma Gamma Tau Outstanding Achievement Award for scholarship and service to the student chapter and the department; American Institute of Aeronautics and Astronautics Outstanding Achievement Award for scholarship and service to the student chapter and the department; John Anderson Scholarship in Aerospace Engineering for the best paper and poster presentation based on research performed at the University of Maryland.

Return to top